CW-H150 HDMI 150m Wireless System

Pil Merkezi tarafından yazıldı.. Yayınlanma Wireless Sistemler

CW H150 1
CW H150 2 CW-H150
HDMI 150m Wireless System
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free (DFS comply)
◆ Uncompressed HDMI (Max 1080p60)
◆ 150 meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 63mW radio power
◆ 2-ch HDMI embedded audio transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Power by DC-IN or various DV plates
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
CW H150 3
CW H150 4

WHDI wireless transmission

HDMI 150 meters (LOS)


CW-H150 wireless system is based on WHDI wireless technology, 5.1-5.9GHz license free bands, DFS comply, , supports uncompressed HDMI (Max 1080p60) to transmit 150 meters (Line-of-Sight) distance, and less than 1 millisecond latency. The system is pure hardware connection, plug and play, which is widely used in director monitoring, drone, ropeway camera, steadicam etc.

CW H150 5
CW H150 6

Input and Output

The Transmitter (Tx) has 2 omni antennas, supports
1x HDMI 1.3 input
1x 7-17V DC input

The Receiver (Rx) has 3 omni antennas, supports
1x HDMI 1.3 output
1x 7-17V DC input

HDMI formats:
1080p60, 1080p59.94, 1080p50
1080p23.98, 1080p24; 1080p25, 1080p29.97, 1080p30;
1080i60, 1080i59.94, 1080i50;
720p60, 720p59.94, 720p50

150meters Transmission

HDMI non-compressed, ≤1ms latency


In Line-of-Sight, CW-H150 supports non-compressed HDMI 150 meters (500 feet) transmission, with less than 1 millisecond latency.

CW H150 7
CW H150 8

Embedded Audio Transmission


CW-H150 supports HDMI embedded audio (CH1&2) transmission.

 

5.1-5.9GHz Frequency 

DFS comply


CW-H150 wireless system works at 5.1-5.9GHz License-free frequency, and support DFS (Dynamic Frequency Switch). The transmitter and receiver are paired to work. Support 3-4 pairs wireless channels to work together in one location.
The wireless output power is less than 63mW, which will not do harm to human bodies.

CW H150 9
CW H150 10

Multicast Setting

Users can Pair up to 4 Receivers with 1 Transmitter, to enable 1 Transmitter to multi Receivers multicast mode.

Power Supply and Set-up


Both Transmitter and Receiver are compact designed, provide 7-17V 2-pin lockable DC input, and equipped with various DV battery plates for selection:

Plate types
Compatible batteries
F
SONY NP-F970/770, SWIT S-8972, S-8970
U
SONY BP-U60/U30, SWIT S-8U63, S-8U93
D
Panasonic CGA-D54/D28, VW-VBD58, SWIT S-8D62, S-8D58, S-8D98
B
Panasonic VW-VBG6, SWIT S-8BG6
V
JVC BN-VF823, SWIT S-8823
I
SSL-JVC50, SWIT S-8i50, S-8i75
C
Canon BP-945/970G, SWIT S-8845, S-8945
E
Canon LP-E6, SWIT S-8PE6

 

CW H150 11
Standard Package


CW-H150 standard package includes:

1x Transmitter (Various DV plates types option)
1x Receiver (Various DV plates types option)
5x Antennas (For transmitter and receiver)
1x Ball head (Cold shoe and 1/4”)
1x D-tap to pole-tap DC cable
1x Pole-tap to pole-tap DC cable

CW-H150 luxury package includes:

1x Transmitter (Various DV plates types option)
1x Receiver (Various DV plates types option)
7x Antennas (2 for Transmitter, 3 for Receiver and 2 for back-up)
1x Articulating arm trestle (Cold shoe and 1/4”)
1x D-tap to pole-tap DC cable
1x Pole-tap to pole-tap DC cable
1x AC-DC adaptor
1x HDMI cable -0.6m
1x Carrying case (for everything)

 

CW H150 12


Technical Description
 
Supported Video Formats

CW-H150 supports the following video formats to transmit:
Supported Video Formats
HDMI 1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)


The receiver outputs the same format as transmitter inputs

 
Pair the Transmitter and Receiver


The CW-H150 wireless transmitter and receiver are already paired in factory. You can directly use without re-pair.
But if you have several units and mixed up the transmitters and receivers, or if you need to do multi-cast, you need to re-pair by yourself. Pairing steps:
(1) CW-H150 Transmitter powered on, and HDMI in connected with camera or video source device.
(2) CW-H150 Receiver powered on, and HDMI out connected with a monitor. The monitor will display “Searching for Camera Unit” then.
(3) Press and hold the Pair button on Receiver, till the monitor displays “Please Press Registration Button on Camera Unit”, release the Receiver Pair button.
(4) Press and hold the Pair button on Transmitter, till the monitor displays “Registration in Progress”, release the Transmitter Pair button.
(5) When progress bar finished, the Transmitter and Receiver are paired successfully.

CW H150 13

   
How to Get the Best Effect of Wireless Transmission


(1) Set the Transmitter and Receiver antennas straight up, even if they are laid down installed. 
(2) Set the Receiver as high as possible.
(3) Avoid walls, trees, water and any blockage as best as you can.

CW H150 14

CW-S300 SDI 300m Wireless System

Pil Merkezi tarafından yazıldı.. Yayınlanma Wireless Sistemler

CW S300 1
CW S300 2 CW-S300
SDI 300m Wireless System
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free (DFS comply)
◆ Uncompressed 3G/HD-SDI transmission
◆ 300 meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 100mW radio power
◆ 2-ch SDI embedded audio transmission
◆ SDI timecode transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Compact transmitter with various DV plates
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
CW S300 3
CW S300 4

WHDI wireless transmission

SDI 300 meters (LOS)


CW-S300 wireless system is based on WHDI wireless technology, 5.1-5.9GHz license free bands, DFS comply, , supports uncompressed 3G/HD-SDI to transmit 300 meters (Line-of-Sight) distance, and less than 1 millisecond latency. The system is pure hardware connection, plug and play, which is widely used in director monitoring, drone, ropeway camera, steadicam etc. 

CW S300 5
CW S300 6

Input & Output

The Transmitter (Tx) has 2 omni antennas, supports
1x 3G/HD-SDI input
1x 3G/HD-SDI loop output
1x 7-17V 4-pin LEMO DC input

The Receiver (Rx) has 5 omni antennas, supports
2x 3G/HD-SDI output
1x 7-17V 4-pin LEMO DC input

SDI formats:
1080p60, 1080p59.94, 1080p50
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30;
1080psf23.98, 1080psf24, 1080psf25, 1080psf29.97, 1080psf30;
1080i60, 1080i59.94, 1080i50;
720p60, 720p59.94, 720p5

300meters Transmission

3G/HD-SDI non-compressed, ≤1ms latency


In Line-of-Sight, CW-S300 supports non-compressed 3G/HD-SDI 300 meters (1000 feet) transmission, with less than 1 millisecond latency.

CW S300 7
CW S300 8  

Embedded Audio/Timecode Transmission


CW-S300 supports SDI embedded audio (CH1&2) transmission, and supports SDI timecode transmission.

 

5.1-5.9GHz Frequency


DFS comply


CW-S300 wireless system works at 5.1-5.9GHz License-free frequency, and support DFS (Dynamic Frequency Switch). The transmitter and receiver are paired to work. Support 3-4 pairs wireless channels to work together in one location.
The wireless output power is less than 100mW, which will not do harm to human bodies.

CW S300 9
CW S300 10  

Multicast Setting

Users can Pair up to 4 Receivers with 1 Transmitter, to enable 1 Transmitter to multi Receivers multicast mode. 

 Power Supply and Set-up


The Transmitter is compact designed, provides 7-17V 4-pin LEMO DC input, and equipped with various DV battery plates for selection:

Plate Types
Compatible batteries
F
SONY NP-F970/770, SWIT S-8972, S-8970
U
SONY BP-U60/U30, SWIT S-8U63, S-8U93
D
Panasonic CGA-D54/D28, VW-VBD58, SWIT S-8D62, S-8D58, S-8D98
B
Panasonic VW-VBG6, SWIT S-8BG6
V
JVC BN-VF823, SWIT S-8823
I
SSL-JVC50, SWIT S-8i50, S-8i75
C
Canon BP-945/970G, SWIT S-8845, S-8945
E
Canon LP-E6, SWIT S-8PE6

The Receiver provides 7-17V 4-pin LEMO DC input, and equipped with V-mount or Gold mount battery plate for option. 

CW S300 11

Standard Package


CW-S300 standard package includes:
1x Transmitter (Various DV plates types option)
1x Receiver (V-mount or Gold mount option)
9x Antennas (2 for Transmitter, 5 for Receiver and 2 for back-up)
1x Articulating arm trestle (Cold shoe and 1/4”)
1x D-tap to 4-pin LEMO DC cable – 0.6m
1x D-tap to 4-pin LEMO DC cable – 1m
1x AC-DC adaptor
1x Carrying case (for everything) 

CW S300 12

  

Tecnical Description
 
Supported Video Formats

CW-S300 supports the following video formats to transmit:
Transmitter Input Supported formats
SDI 1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)
1080psf (30 / 29.97 / 25 / 24 / 23.98)
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)

The receiver outputs the same format as transmitter inputs.

 

Pair the Transmitter and Receiver

The CW-S300 wireless transmitter and receiver are already paired in factory. You can directly use without re-pair.

But if you have several units and mixed up the transmitters and receivers, or if you need to do multi-cast, you need to re-pair by yourself. Pairing steps:
(1) CW-S300 Transmitter powered on, and SDI in connected with camera or video source device.
(2) CW-S300 Receiver powered on, and SDI out connected with a monitor. The monitor will display “Searching for Camera Unit” then.
(3) Press and hold the Pair button on Receiver, till the monitor displays “Please Press Registration Button on Camera Unit”, release the Receiver Pair button.
(4) Press and hold the Pair button on Transmitter, till the monitor displays “Registration in Progress”, release the Transmitter Pair button.
(5) When progress bar finished, the Transmitter and Receiver are paired successfully.

 

CW S300 13

 

How to Get the Best Effect of Wireless Transmission


(1) Set the Transmitter and Receiver antennas straight up, even if they are laid down installed. 
(2) Set the Receiver as high as possible.
(3) Avoid walls, trees, water and any blockage as best as you can.

CW S300 14

   

SDI 300m Wireless HD System

Pil Merkezi tarafından yazıldı.. Yayınlanma Wireless Sistemler

SDI 300m Wireless HD System
CW 300S

SWIT latest announced the new professional SDI 300m Wireless System CW-S300, All-metal housing, Max 1080p50/60 Uncompressed 3G/HD-SDI transmission, and support data encryption.

CW-S300
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free (DFS comply)
◆ Uncompressed 3G/HD-SDI transmission
◆ 300 meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 100mW radio power
◆ 2-ch SDI embedded audio transmission
◆ SDI timecode transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Compact transmitter with various DV plates
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
 
CW H150

Besides, SWIT also announced a new entry-level HDMI 150m Wireless System CW-H150, All-metal housing, durable. Max 1080p50/60 Uncompressed HDMI transmission, and support data encryption.

CW-H150
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free (DFS comply)
◆ Uncompressed HDMI (Max 1080p60)
◆ 150 meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 63mW radio power
◆ 2-ch HDMI embedded audio transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Power by DC-IN or various DV plates
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
 

1000m/3300ft Wireless System with Panel Receiver

Pil Merkezi tarafından yazıldı.. Yayınlanma Wireless Sistemler

 1000m/3300ft Wireless System with Panel Receiver
4914p wireless system with panel receiver

SWIT latest announced the new panel antenna with build-in wireless receiver, works with SWIT S-4904 or S-4914 transmitters to achieve 1000 meters (3300ft) line-of-sight transmission distance, still Max 1080p60 uncompressed SDI/HDMI and non-delay. The panel antenna has 14dBi high Gain, and the wireless receiver is build-in designed, which ensures longer distance, more stable and reliable receiving quality, and robust, rain proof, easy to set-up. Based on the new panel receiver, we provide the following standard wireless products:

 

S-4904P
V / Gold Mount Transmitter and Panel Receiver Kit
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free frequency
◆ Uncompressed 3G/HD/SD-SDI and HDMI
◆ 1000meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 63mW radio power
◆ 14dBi Panel Antenna build-in Receiver
◆ 2-ch SDI/HDMI embedded audio transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Transmitter V / Gold Mount camera install
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play

S 4904P 1
   
S-4914P
Mini Transmitter and Panel Receiver Kit
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free frequency
◆ Uncompressed 3G/HD/SD-SDI and HDMI
◆ 1000meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 63mW radio power
◆ 14dBi Panel Antenna build-in Receiver
◆ 2-ch SDI/HDMI embedded audio transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Mini Transmitter with various DV plates selection
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play
S 4914P 1
   
S-4990
Only Panel Receiver
◆ 14dBi Panel Antenna build-in Receiver
◆ Work with SWIT S-4904/S-4914 transmitter
◆ Extend to 1000 meters distance (LOS)
◆ 1x 3GSDI wireless receiving output
◆ 1x 4-pin LEMO DC 7-36V input
◆ Press buttons to switch wireless bands
◆ RSSI Receiving Signal Strength indicators
◆ Provide VESA bracket to set on lighting tripod
◆ Provide V / Gold mount plate with clamp
S 4990 1
   

S-4914P SDI/HDMI 1000m Wireless System

Pil Merkezi tarafından yazıldı.. Yayınlanma Wireless Sistemler

S 4914P 1
S 4914P 2
S-4914P
SDI/HDMI 1000m Wireless System
◆ WHDI (MIMO/OFDM) technology
◆ 5.1-5.9GHz license-free frequency
◆ Uncompressed 3G/HD/SD-SDI and HDMI
◆ 1000meters (Line-of-Sight) distance
◆ Less than 1 millisecond latency
◆ Less than 63mW radio power
◆ 14dBi Panel Antenna build-in Receiver
◆ 2-ch SDI/HDMI embedded audio transmission
◆ Support 3-4 pairs working in one location
◆ Multicast - 1 transmitter to multi receivers
◆ Mini Transmitter with various DV plates selection
◆ All-metal housing, durable
◆ Pure hardware connection; Plug and Play


S 4914P 3
S 4914P 4

 

WHDI wireless transmission

1000 meters (LOS) with Panel Receiver 

S-4914P Broadcast/Film industry wireless system is based on WHDI wireless technology, 5.1-5.9GHz license free bands, with a new developed high Gain Panel Receiver, supports uncompressed 3G/HD/SD-SDI and HDMI to transmit 1000 meters (Line-of-Sight) distance, and less than 1 millisecond latency. The system is pure hardware connection, plug and play, which is widely used in director monitoring, drone, ropeway camera, steadicam etc.

S 4914P 5
S 4914P 6

The Transmitter

The Transmitter has 2 omni antennas, signal interfaces are:
1x 3G/HD/SD-SDI input
1x HDMI 1.3 input
(If both SDI and HDMI are connected, the system transmits SDI as priority.)
1x 6-17V DC input

 
 Panel Receiver


The Panel Receiver adopts 14dBi high Gain Panel Antenna and build-in wireless receiver design, to set up by lighting tripod.
The Panel Receiver interfaces are:
1x 3G/HD/SD-SDI output
1x 7-36V 4pin LEMO DC input

S 4914P 7
S 4914P 8  

1000meters Transmission

In Line-of-Sight, S-4914P supports non-compressed 3G/HD/SD-SDI and HDMI 1000 meters (3300 feet) transmission, with less than 1 millisecond latency.

 Embedded Audio Transmission 



S-4914P supports SDI and HDMI embedded audio (CH1&2) transmission.

S 4914P 9
S 4914P 10  

5.1-5.9GHz Frequency



S-4914P wireless system works at 5.1-5.9GHz License-free frequency. The frequency bands are user configurable and support 3-4 pairs wireless channels to work together in one location.
The wireless output power is less than 63mW, which will not do harm to human bodies.

 

Multicast Setting


Users can set several Receivers at the same frequency point as the Transmitter, to enable 1 Transmitter to multi Receivers multicast mode.

S 4914P 11

Power Supply and Set-up


Transmitter: Small size designed, equipped with various DV battery plates for selection:

Types
Compatible batteries
F
SONY NP-F970/770, SWIT S-8972, S-8970
U
SONY BP-U60/U30, SWIT S-8U63, S-8U93
D
Panasonic CGA-D54/D28, VW-VBD58, SWIT S-8D62, S-8D58, S-8D98
B
Panasonic VW-VBG6, SWIT S-8BG6
J
JVC BN-V428U, SWIT S-8428
V
JVC BN-VF823, SWIT S-8823
I
SSL-JVC50, SWIT S-8i50, S-8i75
C
Canon BP-945/970G, SWIT S-8845, S-8945
E
Canon LP-E6, SWIT S-8PE6

You can also power the transmitter via 5.5/2.1mm pole tap DC-IN, input voltage 6.5-17V.
Receiver: Provides VESA bracket to set up on lighting tripod, and power via 4-pin LEMO DC-IN, 7-36V. The package also provides V-mount or Gold mount battery plate with clamp, to install battery on lighting tripod.

S 4914P 12

  
Standard Package


S-4914P package includes:
1x Transmitter (Various DV plates types option)
3x Antennas (For transmitter, 2+1 backup)
1x Articulating arm trestle (Cold shoe and 1/4”)
1x D-tap DC cable (For transmitter)
1x Band switching driver (For transmitter)
1x Panel Receiver
1x VESA bracket for lighting tripod (For Receiver)
1x D-tap to 4-pin LEMO DC cable (For Receiver)
1x Battery plate with clamp (V-mount / Gold mount option)
1x Carrying case (for everything)

 
S 4914P 13

Technical Description

Supported Video Formats

S-4914P supports the following video formats to transmit:
Transmitter Input Supported formats
SDI SMPTE-425M 1080p (60 / 59.94 / 50)
SMPTE-274M 1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211 1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M 720p (60 / 59.94 / 50)
SMPTE-125M 480i (59.94)
ITU-R BT.656 576i (50)
HDMI 480i/ 576i / 480p / 576p
1080i (60 / 59.94 / 50)
720p (60 / 59.94 / 50)
1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)


The receiver outputs the same format as transmitter inputs.

 

How to Get the Best Effect of Wireless Transmission


(1) Set the Transmitter antennas at different angles to extend the transmission distance and achieve stable transmission quality.
(2) Set the Panel Receiver as high as possible, and the panel surface aimed at the transmitter direction.
(3) Avoid walls, trees, water and any blockage as best as you can.

S 4914P 14

 

How to Use Several Sets in One Location

There’re 0-9 frequency channels that can be dial switch by users, frequency details are:

Dial Channels

Frequency

Channel 0

5550 MHz

Channel 1

5590 MHz

Channel 2

5630 MHz

Channel 3

5670 MHz

Channel 4

5150 MHz

Channel 5

5190 MHz

Channel 6

5230 MHz

Channel 7

5270 MHz

Channel 8

5310 MHz

Channel 9

5510 MHz

User several wireless channels at one location, to avoid interference, please set the frequency bands far away from each other.

S 4914P 15